| BRASS THREADED REDUCERS |
|
|
| Brass threaded reducers are basically used when there is a need to reduce the thread size of any connector. The required thread length of connector depends upon its particular application. So to make some adjustments with the length of a connector these reducers act as the cheapest & easiest way to reduce the thread size of any threaded connector. |
 |
|
|
| BRASS LOCK NUTS |
|
|
An lock nut is used to fasten a bolt on something that is subject to repetitive vibration--say, a wheel axle or engine accessory--would eventually vibrate loose. Lock nuts prevent this from happening. Lock nuts typically have a malleable insert that deforms to grip the threads of the bolts they're threaded on to, which in turn keep the nuts from vibrating loose.
|
 |
|
| AVAILABLE WITH FOLLOWING THREADS |
| METRIC THREADS |
PG THREADS |
| PG 7 |
M12 X 1.5 |
| PG 9 |
M16 X 1.5 |
| PG 11 |
M20 X 1.5 |
| PG13.5 |
M25 X 1.5 |
| PG 16 |
M32 X 1.5 |
| PG 21 |
M40 X 1.5 |
| PG 29 |
M50 X 1.5 |
| PG 36 |
M63 X 1.5 |
| PG 42 |
|
| PG 48 |
|
Any kind of customised lock nuts with any special specification can also be developed. |
|
|
| BRASS BLANKING / DOME PLUG |
|
|
| These Dome Plugs are designed to fit and seal unused knock-out holes. These are also used when existing PG-threaded holes are not yet, or no longer required. There are some places in a fitting where threads are not required in application. So to keep the threads from getting damaged these plugs are used. They provide a safety to a particular thread and can be used again when it is required. |
 |
|
|
| MALE-FEMALE BUSH |
|
|
We manufacture Brass Bush from the Very Premium Quality of Brass. We are providing both male-female bush. All type of bush are manufactured according to the standards specified by our clients.
|
 |
| |
| AVAILABLE WITH FOLLOWING THREADS |
| PG THREADS |
METRIC THREADS |
| PG 7 |
M12 X 1.5 |
| PG 9 |
M16 X 1.5 |
| PG 11 |
M20 X 1.5 |
| PG13.5 |
M25 X 1.5 |
| PG 16 |
M32 X 1.5 |
| PG 21 |
M40 X 1.5 |
| PG 29 |
M50 X 1.5 |
| PG 36 |
M63 X 1.5 |
| PG 42 |
|
| PG 48 |
|
|
|
|
|
|
|
|
|
MATERIAL:- IS 319/89-GRADE l, IS 319/89-GRADE ll, IS 319/89-GRADE lll, IS 2704/83 – CuZn35Pb1, BS 2874 – CZ 121 Pb3, UNS C36000, BS 2874 – CZ 131 ETC.
FINISH:- All our products are available with Natural, Nickel Plating, Silver, Chrome, Nitric Acid, Buffing etc kind of finish as required by Customer.
We welcome all your inquiry for customised & specific requirements of all types of Cable Glands & Accessories. |
